Home / Services

Rooftop solar services in Mohali and Tricity

Maya Green Power manages rooftop solar projects end to end, from the initial bill assessment to net-meter installation, followed by service and warranty support. We offer four system types, described here. Share your electricity bill and we will recommend the right one for your property.

Solar panels on the terrace of an independent house

3–5 kW, on-grid

Home solar

The usual choice for an independent house that wants a smaller bill.

  • PM Surya Ghar subsidy if you're eligible
  • Net meter from your electricity board
Large house with solar panels on a raised roof structure

5–10 kW, on-grid or hybrid

Large homes

For kothis and bigger houses with several ACs running through summer.

  • Sized around your actual load, ACs included
  • Higher-efficiency panel options
  • Battery backup if you want it
Hybrid solar inverter and battery mounted on a wall

Hybrid, with battery

Solar with backup

For homes, clinics and shops where a power cut costs you something.

  • Keeps lights, fans, Wi-Fi, CCTV, the fridge and chosen sockets on
  • You still get the lower bill
Solar installation on the roof of a school building, seen from above

10–50 kW, on-grid

Commercial rooftops

For shops, clinics, schools, offices and warehouses that use most of their power in the day.

  • Savings and payback estimate, with the assumptions written out
  • Works on RCC roofs and metal sheds

What every project includes

Every project, whatever its size, covers the same six things, all set out in your proposal.

  • Design. Sized from your bills, your sanctioned load and your roof.
  • Supply. Panels, inverter, structure, cables and safety equipment, each named by make and model.
  • Installation. By our own team, to our written specification, checked as set out below.
  • Net-metering paperwork. The application, the inspection and the follow-up with your electricity board.
  • Subsidy steps. For homes that qualify for PM Surya Ghar.
  • Handover and service. Serial numbers, warranty cards, test readings and one contact for service.

Pricing is confirmed after a site survey. Who does what at each stage is on the home page, and whether you need an on-grid or a hybrid system is explained on the battery backup page.

Our written specification

Two quotations at the same price can describe very different systems. Every Maya Green Power proposal specifies the seven points listed here, so that you can compare offers on a like-for-like basis.

Underside of a raised solar structure on a Mohali roof: galvanised steel legs on concrete footings, with rails carrying the panels
  1. Panel make and model, and ALMM listing where required
  2. Inverter brand, capacity and BIS certification
  3. Mounting structure material, height and wind-load design
  4. DC and AC cable specification and protection devices
  5. Earthing and lightning protection
  6. Product and performance warranties, and who services them
  7. Net-metering support, commissioning report and handover documents

How we check every installation

Installation is carried out by our own team. We check the work at three points, and each check is recorded in the handover file you receive.

  1. Site survey, in person

    We measure the roof, check shading through the day, and inspect the structure, the meter, the earthing and the existing wiring. Your sanctioned load is confirmed before any price is given.

  2. Photo checks during installation

    The installation team sends dated photographs at fixed points: the structure and its anchoring before the panels go on, the cable routes and connections before covers are closed, the earthing and lightning arrester, and the inverter and protection boxes. We review each set before the work moves on.

  3. Handover inspection, in person

    We inspect the finished system against your written specification. Panel and inverter serial numbers are matched to the proposal, the earthing reading is recorded, and the inverter is checked for output before you sign off.

What we look at

  • Footings. Each leg set in a proper concrete footing that can withstand storm winds.
  • Structure. Galvanised steel, free of rust at cut ends and welds, and braced against movement.
  • Panels. Straight rows, clamped where the manufacturer specifies, and clear of shade from tanks or walls.
  • Cabling. In conduit and secured, with nothing hanging loose or lying in standing water.
  • Earthing. A dedicated earthing strip from the structure to ground, and a lightning arrester above the panels.
  • Roof. Left clean, with no debris and no damage to the waterproofing.

If something needs attention later, you call us. Our team carries out the repair, and we take any product warranty claim to the manufacturer.

Galvanised steel solar structure with legs set in concrete footings on a flat roof, photographed before the panels were fitted
A structure checkpoint photograph from a 6 kW home installation in Mohali, taken before the panels were fitted.
Earth pitEarth pitInverterDC boxAC box

Site survey: we measure the roof and check shading, the structure, the meter and the earthing before any price is given.

Structure: photographed with its anchoring before the panels go on.

Panels: fitted on the checked structure.

Cables: routes and connections photographed before the covers are closed.

Earthing: the earth pits and lightning arrester are photographed.

Inverter and protection boxes: mounted, connected and photographed.

Handover: serial numbers matched to the proposal, the earthing reading recorded and the output checked before you sign off.

Service after installation

A solar system has no moving parts and requires very little maintenance. Where attention is needed, customers contact us directly.

The monitoring app shows daily generation. If output falls or the inverter reports a fault, send us a screenshot on WhatsApp. We diagnose whether the cause lies with the grid, the inverter or a panel, and arrange the repair or the warranty claim with the manufacturer.

Homes get four Care Shield visits a year for the first five years, timed to the seasons. Between visits, and for businesses, rinse the panels with plain water every couple of weeks in dusty months, early in the morning or in the evening.

My solarToday16.2 unitsProducing now: 3.1 kWProducing now: 0 kW6 am12 noon6 pmSystem normalFault reportedMy solarThis weekUnits made each dayMTWTFSSLower than usualBack up after a washMaya Green PowerInverter shows a faultThanks. We will check thegrid, inverter and panelsand arrange the repair.Inverter offlineTap to see details

Every day: the inverter’s app shows how many units your panels made today and what they are producing right now.

Spot a drop: dust and smog lower the output, and the app shows it. A wash with plain water every two weeks or so brings it back.

Faults show up early: if the inverter reports a fault, send us a screenshot on WhatsApp. We find whether the grid, the inverter or a panel is the cause, and arrange the repair or the warranty claim.

Book a free site survey

Leave your name, number and area. What happens next:

  1. We call or WhatsApp you, normally within one working day, with an indicative system size and saving. If solar is not worth it for you, we say so.
  2. We survey your roof for free: the area, shading, the structure it needs, the meter and the wiring. You commit to nothing before this visit.
  3. You get a written proposal: the system size, every component by make and model, the warranties, the timeline and a savings range.

Prefer to send your bill directly?

Monday to Saturday, 10 am to 7 pm. We speak Hindi, Punjabi and English.

Your details

We call or WhatsApp you, normally within one working day.

The enquiry and the site survey are free. We never charge a fee to take your details.