Home / Services / Home solar

Rooftop solar for homes in Mohali, Zirakpur and Kharar

For independent houses and kothis, a grid-connected (on-grid) system is normally the most cost-effective choice. It has the lowest cost per kW, delivers the largest reduction in the electricity bill, and is the system type supported by the PM Surya Ghar subsidy. This page explains how to size a residential system and how it operates with your electricity board: PSPCL in Punjab, CPDL in Chandigarh or UHBVN in Panchkula.

What affects solar rooftop installation cost?

A solar rooftop system is planned around your electricity use, available roof area and shading. Solar rooftop installation costs depend on the system capacity, the panels and inverter selected, the mounting structure, the cable routes and whether battery backup is required. For homeowners comparing solar panels for home cost, a complete installed quotation is more useful than a panel-only price.

If you are planning solar for a home in Mohali, our page on solar installation in Mohali covers local roofs, the PSPCL steps and the areas we serve.

What size system do you need, and what will it save?

Enter your monthly bill, or the units on it. We size the system from your use at 2026-27 rates and show the price, the subsidy and the payback.

Is it for a home or a business?
Where is it?

PSPCL bills cover two months, so halve the total.

Units, sanctioned load and category

The units printed on your bill are more exact than the amount. Leave this empty to use the amount.

Estimates use energy charges at 2026-27 rates, before fixed charges and duty, and 3.6 to 4.2 units per kW a day. Prices are typical installed ranges including GST, not a quote. Subsidy and price figures checked 12 October 2026.

How an on-grid system works with your PSPCL, CPDL or UHBVN meter

Solar panels generate DC power. An inverter, normally installed near the meter, converts it to the same AC power supplied by the grid. The house consumes solar power first, and all appliances, including air conditioners, operate exactly as before.

When generation exceeds consumption, which is common in the afternoon, the surplus is exported to the grid. The electricity board replaces the existing meter with a net meter that records units in both directions, and the bill is raised for imported units less exported units.

At night and in poor weather the house draws from the grid as usual. Under current PSPCL rules in Punjab, surplus units from high-generation months are carried forward, which offsets lower winter output.

An on-grid system shuts down during a power cut, as a mandatory safety feature. Where outages are frequent, a hybrid system should be considered. See solar with battery backup.

Sizing around Punjab's 300 free units

Domestic PSPCL connections receive 300 free units a month, and this is central to how we size a residential system. Where net metering keeps billed units within the free limit, the bill remains at or near zero, and additional capacity beyond that point adds cost without adding savings.

In some cases this results in a smaller system than a standard quotation would suggest. Sizing is based on summer bills, when the limit is most likely to be exceeded. A general-category home that crosses the limit pays for every unit, as the example below shows.

June, without solar: 520 units

Energy charges ₹0Over the limit, so every unit is billed: ₹2,826

The same home with 3 kW of panels

Energy charges ₹0Over the limit: ₹2,826About 360 units from the panels bring net use to 160: ₹0

General category, Punjab energy charges for 2026-27 (₹4.25 a unit up to 300 and ₹7.05 above). Fixed charges and duty are not included. Free-unit rules are set by the Punjab government and may change.

Standard homes and large homes

3 to 5 kW, on-grid

The standard configuration for an independent house with one or two air conditioners. A 3 kW system comprises five or six panels. It is eligible for the PM Surya Ghar subsidy, subject to the scheme's rules, and we manage the net-metering application with your electricity board.

5 to 10 kW, on-grid or hybrid

For kothis and larger houses running several air conditioners through the summer. The system is sized to the actual load, with battery storage available where power cuts are a concern. A home system cannot be larger than the sanctioned load. For systems of up to 10 kW, the regulators' rules in Punjab and Chandigarh say the electricity board should carry out any increase needed with the solar application. Above that, a load enhancement may be required first. We verify this from the bill at the outset. From about 9 kW, non-DCR panels without the subsidy usually cost less than DCR panels with it; the subsidy page shows when the subsidy is worth taking.

Get a price for your house
Underside of a raised solar structure on a house roof, showing the steel legs and rails
A raised structure keeps the roof usable underneath. From a 6 kW job in Mohali.

Roof assessment

Most houses in the region have a flat RCC roof, which is well suited to solar. Panels are normally mounted on an elevated galvanised steel structure, which keeps the roof usable underneath.

Shading has a significant effect on output. A water tank or parapet that shades part of one panel for a few hours reduces the output of every panel connected with it. Our survey therefore assesses shading from tanks, stair rooms, trees and neighbouring buildings, together with the structural condition of the roof. Where a roof is not suitable, we advise the customer accordingly.

Allow about 80 to 100 sq ft of shade-free roof for each kW, so a 3 kW system needs about 250 to 300 sq ft and a 5 kW system about 400 to 500. Every part of the system, from the panels to the earthing, is named in your proposal; see our written specification and the brands we can source.

Frequently asked questions

Can I run my ACs on solar?

Yes. With an on-grid system the house draws from the panels and the grid together, so an AC runs exactly as it does now. What changes is the bill. On a summer afternoon a 5 kW system can cover two or three ACs on its own, and at night the grid takes over.

How much maintenance does it need?

Very little. Wash the dust off the panels with plain water every couple of weeks, more often in the dry months and after a dust storm. Do it early in the morning or in the evening, when the glass is cool. There are no moving parts, and the app shows you if the output drops.

Does solar work in winter fog and on cloudy days?

It works, but it makes less. December and January are the lowest months here and May is the highest. Sizing from a full year of bills accounts for this, and the units carried forward from sunny months help cover the winter.

Can I add more panels later?

Often, yes, if the inverter and your sanctioned load have room for them. If you expect to add an air conditioner, an EV charger or another floor, let us know at the design stage so that the inverter is specified with that capacity in mind.

I live in a flat. Can I get rooftop solar?

Only if you have rights to a part of the roof and your own meter. We currently undertake independent houses and kothis. Housing societies considering solar for lifts and common-area lighting are welcome to contact us to discuss requirements.

Book a free site survey

Leave your name, number and area. What happens next:

  1. We call or WhatsApp you, normally within one working day, with an indicative system size and saving. If solar is not worth it for you, we say so.
  2. We survey your roof for free: the area, shading, the structure it needs, the meter and the wiring. You commit to nothing before this visit.
  3. You get a written proposal: the system size, every component by make and model, the warranties, the timeline and a savings range.

Prefer to send your bill directly?

Monday to Saturday, 10 am to 7 pm. We speak Hindi, Punjabi and English.

Your details

We call or WhatsApp you, normally within one working day.

The enquiry and the site survey are free. We never charge a fee to take your details.